Ircef S.r.l.’s production of spindles for door handles represents the pride and joy of a company active in the sector for more than fifty years, with 800 m2 of covered plant thanks to the steady and continuous professional, technological and construction updating.
A wide and complete range of articles, our spindles for door handles are differentiated into various types of components, among which are bevelled spindles, flat spindles, fixed washers, expansion knurled spindles, Niplex threaded fittings, iron reduction fittings and various fixing plates: an ideal offer for any desired requested use or functional need.
Main Door Handle
ART. 100
Beveled spindle
Surfaces: Zinc-plated / Tropic.
Availability: Q.4 / 4.5 / 5 / 6 / 7 / 7.6 / 8 / 8.5 / 9 / 10
Length on request
ART. 101
Spindle with radiused corner
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8 / 9 / 10
Length on request
ART. 102
Unbeveled spindle
Surfaces: Zinc-plated / Tropic.
Availability: Q.4 / 4.5 / 5 / 6 / 7 / 7.6 / 8 / 8.5 / 9 / 10
Length up to 3000 mm
ART. 105
Spindle – Milled on 1 side
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 7.6 / 8 / 8.5 / 9 / 10
Length on request
ART. 110
Spindle – Milled on 2 sides
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 7.6 / 8 / 8.5 / 9 / 10
Length on request
ART. 111
Spindle – Milled 1.2 mm on 1 or 2 sides
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 7.6 / 8 / 8.5 / 9 / 10
Length on request
ART. 115
Spindle – Milled and cut
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 7.6 / 8 / 8.5 / 9 / 10
Length on request
ART. 120
Spindle – Milled and cut on 2 sides
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 7.6 / 8 / 8.5 / 9 / 10
Length on request
ART. 121
Spindle with cutting on 1 or 2 sides
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 8 / 8.5 / 9 / 10
Length on request
ART. 125
4 x 8 Flat spindle – Milled on 1 side (bent)
Surfaces: Zinc-plated / Tropic.
Availability: 4 x 8
Length on request
ART. 130
4 x 8 Flat spindle – Milled on 2 sides
Surfaces: Zinc-plated / Tropic.
Availability: 4 x 8
Length on request
ART. 135
Beveled and milled spindle on 1 side
Surfaces: Zinc-plated / Tropic.
Availability: Q.6
Length on request
ART. 140
Rectangular spindle – 3.3 mm milled
on 1 or 2 sides
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8 / 8.5 / 9 / 10
Length on request
ART. 145
Spindle Q.8 reduced on 1 or 2 sides to Q.6, Q.7, Q.8,
Surfaces: Zinc-plated / Tropic.
Availability: Q.8 / 8.5 / 9 / 10
Reduction length and cut on request
ART. 150
Q.7 spindle reduced
on 1 or 2 sides to Q.6
Surfaces: Zinc-plated / Tropic.
Availability: Q.7
Reduction length on request
ART. 160
Spindle – Milled and cut Reduced
on 1 or 2 sides to Q.8
Surfaces: Zinc-plated / Tropic.
Availability: Q.8.5 / 9 / 10
Length on request
ART. 165
Spindle with double chamfering
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 8
Chamfering distance on request
ART. 170
Chamfered spindle
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 8
Chamfering distance on request
ART. 171
Spindle Q.8 reduced to Q.7 + chamfering
Surfaces: Zinc-plated / Tropic.
Availability: Q.8
Reduction length and chamfering distance on request
ART. 175
Spindle – Milled on 1 side + chamfering
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 8
Chamfering distance on request
ART. 180
Spindle – Milled and cut on 1 side + chamfering
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8
Chamfering distance on request
ART. 195
Spindle with screwdriver cut
Surfaces: Zinc-plated / Tropic.
Availability: Q.5 / 6
Length on request
ART. 200
Spindle – Milled and cut + Rotating Niplex 8MA / 10MA / 12MA / 14MA / 14MB for 14 MM
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8 / 8.5 / 9 / 10
Length upon request CH 12 / 14 / 17
ART. 205
Spindle – Milled and cut + Rotating Niplex 8MA / 10MA / 12MA / 14MB for 19 / 20 MM
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8 / 8.5 / 9 / 10
Length upon request CH 12 / 14 / 17
ART. 210
Spindle – Milled and cut + Fixed Washer
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8 / 9 / 10
Length and washer diameter upon request
ART. 215
Expansion knurled spindle
Surfaces: Galvanized
Availability: Q.7 / 8
Length MM 45 / 50 / 55 / 60 / 65 / 70 / 75 / 80 / 85 / 90 / 100
ART. 225
Spindle – Grooved and Milled on 1 side
Surfaces: Zinc-plated / Tropic.
Availability: Q.6
Length and groove number upon request
ART. 230
Spindle with groove
Surfaces: Zinc-plated / Tropic.
Availability: Q.5 / 6 / 7 / 8 / 9 / 10
Length and groove diameter upon request
ART. 235
Articulated spindle with internal thread
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8
Length upon request
ART. 236
Articulated spindle with internal and external threads
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8 / 9 / 10
Length upon request
ART. 240
Spindle with through hole
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 8 / 10
Length and hole diameter upon request
ART. 241
Spindle – Milled and cut on 1 side + Internal hole D.4
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8
Length upon request
ART. 245
Spindle with internal threading,
open or blind
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 8
Length and thread on request
ART. 246
Spindle with external thread
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 8 / 9 / 10
Length and thread on request
ART. 251
Spindle with 1 or 2 Bores (without cut)
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8 / 8.5 / 9 / 10
Length upon request
ART. 255
Spindle with Custom Notch
Surfaces: Zinc-plated / Tropic.
Availability: Q.8
Length MM 50 / 60
ART. 305
Fixing Plate – Spindle milled and articulated
Surfaces: Zinc-plated / Tropic.
Availability: Q.8 / Q.7
Length upon request
ART. 306
Mouse ear fixing plate with Spindle Q.8 Milled and articulated
Surfaces: Zinc-plated / Tropic.
Availability: Q.8
Length upon request
ART. 310
Universal Fixing Plate – Spindle milled + Thread M8 articulated
Surfaces: Zinc-plated / Tropic.
Availability: M8 and Q.8
Length upon request
ART. 311
Mouse ear fixing plate with Threaded M8x15 articulated
Surfaces: Zinc-plated / Tropic.
Availability: Q.8
Length upon request
ART. 320
Turned and Beveled Spindle
Surfaces: Zinc-plated / Tropic.
Availability: Q.5 / 6 / 7 / 8 / 9 / 10
Length upon request
ART. 330
Spindle turned on 1 side
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 8 / 9 / 10
Diameter and length upon request
ART. 335
Spindle Q.8 with 2 Holes and Cut
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8
Length and cut upon request
ART. 340
Spindle with D.3 Holes
Surfaces: Zinc-plated / Tropic.
Availability: Q.6 / 7 / 8
Number of holes upon request, Length upon request
ART. 345
Spindle with 1 or 2 Notches
Surfaces: Zinc-plated / Tropic.
Availability: Q.7 / 8
Length upon request
ART. 350
Spindle with 35×35 Plate + Return Spring
Surfaces: Zinc-plated / Tropic.
Availability: Q.8 / Q.7
Length Q8 upon request
Dimensional tolerances for handle spindles
All of our handle spindles may be selected with the following dimensional tolerances in the square profile
Handle spindles for all door types
Ircef’s fifty years of specialized experience, its ability to regularly monitor and grasp market expectations and client needs, and its maximum effort in the creation of efficient products that perform well over time have created a company that represents a true national and international reference point for the window, hardware and handle sector.
From handles for internal doors to external armoured doors, the Ircef S.r.l. handle spindles are inserted perfectly into the lock mechanism always guaranteeing the maximum functionality of the final product, whatever its use or style. Punctuality, flexibility, customization of the raw materials upon request and the technical characteristics of each item are the advantages that make Ircef an attentive listener to client needs and a true leader in the sector.
